0.28" LED Dual Display Digital Current Voltmeter + Shunt

Brand	N/A
Model	N/A
Quantity	1
Color	Black
Material	Plastic + iron
Specification	Supply voltage: 4.5~30V; Measuring current: 100A
Features	Dual display digital current and voltage meter
Application	Table with five wiring, easy access to car / battery car / motorcycle car lines, used to monitor the battery voltage, battery voltage status grasp, can also be used for other products voltage and current measurement purposes
English Manual/Spec	Yes
Other	Supply voltage: 4.5~30V; Test voltage: 0~100V; Minimum resolution: 0.1V; Measuring current: 100A (requires external shunt); -2A, 5A, 10A resolution: 0.01A (direct measurement without the need for external shunt), more than 5A as long-term continuous operation at full load, it is recommended to measure the end of the wire soldered directly to the outlet; -50A, 100A resolution: 0.1A; Operating current: <20mA; Display: 0.28" LED, two-color (red and blue); Dimensions: 48 x 29 x 21mm; Installation hole: 45.5 x 26.5mm; Measurement rate: 500mS / times; Wiring Methods: Header power supply: two line socket; Fine - black line: Header powered ground; Fine - Red: positive power supply header (note the fine line between red and black voltage cannot exceed 30V); Test side: three-wire outlet; COM - black line: Test public side; PW + - Red: measure the positive voltage input; -IN + - Yellow line: Current input terminal; due to header with common ground design, that side of the ground and power measurement terminal - the ground is the same, so only received the device under test between the negative and the negative power supply, pick the wrong will burn, (such as single do voltmeter recommended when using the yellow line and the black line together, to prevent outside interference caused ammeter digital)
Packing List	1 x Dual display digital current and voltage meter (15cm-cable) 1 x 100A 75mV shunt

0.28" LED Dual Display Digital Current Voltmeter + Shunt - Black (100A / 75mV)