Description
Every drip irrigation system depends on reliable, leak-free connection fittings to keep the system together.
Your 20-Piece Habitech Irrigation Fittings Kit contains: 6 Tees - Create three-way layouts of poly tubing or drip line with barbed tees. 6 Couplings - Create two way layouts of poly tubing or dripline with barbed couplings. 2 Elbows - Create 90 degree layouts of poly tubing or dripline with barbed elbows. 6 Figure Eight Line End Closures - Plug the end of your poly tubing or dripline with these drip irrigation end caps.
Product Specifications: For connecting emitterline and polyethylene tubing Use with 17mm emitterline and distribution tubing Economical one piece construction UV resistant high impact plastic Secure and easy installation without glue or clamps Operating pressure: up to 50 PSI
Installation Tips: To use the fittings with drip tubing, push the tubing very firmly over the barbed side of the connector, tee, or elbow for a very tight fit that won't leak If you wish to soften the tubing before installing the fitting, let the tubing rest in the hot sun or briefly apply a heat gun or blow dryer to the tubing end before inserting the fitting If your system runs at pressures higher than 25 PSI, you may want to use ratchet clamps to secure the tube on the fitting
|
