Description
Qty: 3 Pack. You will receive a pack of 3 individual Power-Loc adapters. This connector is ideal for drip system watering kit installations such as solid set, drip line or other low flow agriculture, landscape, nursery, residential and commercial irrigation. Perfect irrigation riser part for conversion of 1/2" tubing to your faucet head attachment, garden hose or soaker hose. With reliable universal fit, these drip system head irrigation adapters are essential drip irrigation supplies.
To Install: 1) Twist collar clockwise toward center of fitting. 2) Firmly push the end of the irrigation tubing over the exposed barb. If necessary you can warm the tubing by letting it sit in the sun or running hot water or a hair dryer over it so it will stretch over the barb component fairly easily. 3) Twist collar counter-clockwise to secure tubing or tape.
Specifications: 3/4" Female Hose Thread x 1/2" or 5/8" Tubing Acceptable Inside Diameter: 0.520 - 0.620 in (13.2 to 15.7mm) Acceptable Wall Thickness: 0.045 to 0.055 in (1.14 to 1.40mm) For use with 16 mm, 17 mm and 18 mm tubing Materials: Glass reinforced Polypropylene Operating pressure up to 60 PSI Positive stop to assure tubing is fully installed Low effort, quickly locks in place, no special tools needed Barbed head ensures distribution tubing will not slip out or blow off at high pressure and temperature To connect Total CV and poly / polyethylene supply tubing or distribution hose tubing Removable lock collar - for flushing or winterizing the drip system Approved for use in waste water systems
|
